Products · Systems
Complete, bespoke hydraulic systems engineered around your machine — not just a power pack. As one of Pune's oldest hydraulic manufacturers, every system is made to order and fully customised: we scope the duty, engineer the circuit, build and test the unit, and match it to your machine interface — from boom luffing and stacker–reclaimer duty to lubrication and special-purpose machines.
What it is
A hydraulic power pack is the source of power. A hydraulic system is the whole engineered solution — the power unit plus the control circuit, manifolds, piping, actuators interface and the integration onto the machine — designed so the complete function works the way the machine needs it to.
Many machines need more than an off-the-shelf unit. Multiple actuators have to be sequenced, forces and cycle times have to be met, and the hydraulics have to fit and talk to the rest of the machine. That is systems work: understanding the application, engineering the circuit and control philosophy, then building and testing it as one integrated deliverable.
We do this for OEMs building their own machines and for special-purpose machines where the requirement is unique. The power pack we make may be a single item, or it may be one element of a larger system we scope, engineer, build, test and hand over ready to integrate.
Systems we have built to order:
What we engineer
Every system is defined by the machine, so there is no fixed catalogue. The parameters below are typical / illustrative to show the envelope we work within; the exact system is scoped and confirmed on enquiry.
| Element | Typical range / option | Notes |
|---|---|---|
| Working pressure | up to 650 bar (typ.) | Tested on our in-house bench |
| Flow rate | up to 200 LPM (typ.) | Sized to cycle time & actuator volume |
| Actuators / stations | Single to multi-actuator | Sequenced to the machine function |
| Control | Manual / solenoid / PLC-ready / proportional | Philosophy matched to the duty |
| Valving | Manifold-mounted valve circuit | Directional, pressure, flow & proportional |
| Cooling & filtration | Air / water cooling; multi-stage filtration | Where heat load & cleanliness require |
| Machine interface | Ports, mounting, footprint, electrical | Matched to your machine & panel |
Typical — confirmed on enquiry. The above are indicative reference parameters, not a final specification or price list. The complete system is scoped, engineered and confirmed by a Suyog engineer before quoting. Detailed datasheet available on request.
Where our systems work
Systems and integration for machines where hydraulics are core to the function.
Sequenced, multi-actuator systems for SPMs and cells.
SPM power units →Clamping, actuation and auxiliary hydraulics integrated to the machine.
Machine-tool HPUs →Higher-pressure systems with staged press control.
Press power packs →Rugged systems for casting cells, plant and heavy duty.
All applications →Options
In-house testing
The complete power unit and circuit are run on our own bench — pressure, flow and functional operation verified up to 650 bar and 200 LPM where applicable — and the system ships with a pre-dispatch test record.
Warranty & documentation
Each system ships with a pre-dispatch test record confirming pressure, flow and functional operation. A detailed datasheet — system schematic, component schedule and interface details — is available on request for your enquiry. Warranty terms are confirmed with your quotation.
Questions
A power pack is the source of hydraulic power — pump, motor, tank and valves. A hydraulic system is the whole solution: the power unit plus the control circuit, manifolds, piping, actuators interface and the integration onto your machine, engineered so the complete function works as intended. We supply both, and often the power pack is one part of a larger system we build.
Both. If you have a full specification we build to it. More often we start from what the machine has to do — the motions, forces, cycle time and interfaces — and our engineers scope the system, propose the circuit and confirm the specification with you before build.
Yes. Systems are engineered to your machine interface — port sizes and connections, mounting and footprint, and control philosophy from manual through solenoid to PLC-ready and proportional control, with the electrical junction and terminal layout to suit your panel.
Yes. The power unit and circuit are function- and pressure-tested on our in-house bench — up to 650 bar and 200 LPM where applicable — and the system ships with a pre-dispatch test record. Commissioning support on your machine can be arranged.
Related products
Power units engineered to your pressure, flow and control.
View product →Multi-actuator power units for special-purpose machines.
View product →Custom valve blocks integrated into the system circuit.
View product →Related guides
Get started
Share your machine function or specification and our engineers will scope the hydraulic system, confirm the design, and respond with a specification and quote.
